Membrane air separation of nitrogen
Friday, 20 July 2018
Membrane air separation of nitrogen called hollow fiber membrane separation, It is made of air, which can separate oxygen and nitrogen under certain pressure by using different gases such as oxygen and nitrogen to have different infiltration rates in the membrane. Compared with other nitrogen plant it is more simple structure, smaller volume, no switch valve, less maintenance, produce gas quickly (≤3 minutess), convenient of capacity, it is especially suitable for medium and small of the nitrogen purity to 99.5% or less nitrogen users, have an optimal function price. When the purity of nitrogen is over 98%, the price is more than 15% higher than that of PSA nitrogen generator of the same specification.
Deep freezing technology
Saturday, 14 July 2018
Deep freezing technology is the most widely used air separation technology at present, and it is also the focus of competition among countries in air separation technology. Cryogenic technology uses the principle of different boiling points of oxygen and nitrogen gases under the same pressure to separate gases Compared with the separation device of other processes, the air separation device developed by cryogenic technology can easily meet the requirements of high yield and high purity, which can meet the requirements of modern large-scale industrial production. Therefore, the most discussed and widely used in the air separation industry is the air separation device using cryogenic technology.
Piston compressor
Wednesday, 20 June 2018
What classifications of the piston type compressor? The piston compressor has various kinds of types, and also has different kinds of classification. It is classified into vertical, horizontal type, angle type, symmetrical balance and contrast-position type according to the figuration of cylinder in the piston compressor. It can be classified into single stage type, double stage and multistage according to the the compressed series of the piston compressor. As for the set mode of the piston compressor, it can be classified into mobile type and stationary type. It can be classified into unloading type and pressure switch type according to the control type of the piston compressor. How the compressor works? The theory of the piston compressor works: AS the
Pressure vessel
Wednesday, 13 June 2018
Because the air separation plant is always involved in pressure vessel issue, so the pressure vessel is also one part of air separation plant. The first article : in order to make sure the safe operation of the pressure vessel and protect the safety of people’s lives and property and to promote the development of national economy, this code is formulated according to the relevant provisions of the Interim Regulations on safety supervision of boilers and pressure vessels. The second article: The applicable scope of this procedure is as follows; This procedure is applicable to pressure vessels with the following conditions Maximum working pressure (Pw) (note 1) greater than 0.1MPA (no hydrostatic pressure, same below) Inner diameter (non-circular section refers
Turkey plant is being commissioning
Friday, 08 June 2018
The air separation plant sold by our company to Turkish customers has been successfully installed. Now the equipment is being commissioned.
Italian nitrogen production equipment shipped at the end of May
Monday, 04 June 2018
The nitrogen plant sell to our Italy client is successfully delivered in this month; The unattended nitrogen plant supplied by Suzhou Xinglu Air Separation Plant Science and Technology Development Co.,Ltd can apply for many purpose, such as use the nitrogen as protection air, material air, purging air and sealing air etc.
The rapid development of China’s air separation industry
Thursday, 31 May 2018
In terms of the development of large-scale air separation plants in China, the number of large-scale air separations has reached an absolute majority in the world. The ratio of 60,000-class air separations to global air separation is greater than 75 percent; the domestic monomer scale has reached 100,000-scale. In the market demand of the past three years, the proportion of extra-large air separations accounted for the vast majority. The characteristics of the construction of air separation plants in China in recent years are as follows: First, attach importance to the stability of equipment units, because it limited by the conditions of transportation and installation is difficult. Second, the equipment installation time is short, there are loopholes in management. Three, Some
The kinds of the adsorbents
Tuesday, 22 May 2018
The adsorbents usually used in the industry include: the Silica gel ,active alumina, activate carbon molecular sieve and etc. Moreover, there are also other adsorption material as per some composition selective adsorption, whether the air can be successfully adsorbed, it is mainly depended on the adsorption performance, so the adsorbent selection is the first issue for the adsorption confirm. Active aluminium oxide is made from the Aluminum hydrates are heated and dehydrated. Its performance is depended on the preliminary state form the hydroxide, it is usually not the pure Al2O3,Partially hydrated amorphous porous structural material.In which there are not only amorphous gels but also crystals of hydroxide.It has strong affinity for water and is an adsorbent for deep drying of
The role of air separation equipment in the industrial field and the big secrets for the demand
Friday, 18 May 2018
With the rapid development of China’s economy, the importance and role of industrial gases in the economy have become increasingly prominent. As an important basic raw material for modern industry, gas products have a wide range of applications. Industrial gases mainly include oxygen, nitrogen, argon, helium, neon, krypton, xenon, hydrogen, carbon dioxide, acetylene, natural gas, etc., involving all aspects of industry. The industrial gases mentioned in this paper mainly refer to the ability to separate and obtain oxygen, nitrogen, and argon through air filtration equipment. Rare gases such as helium and neon can also be obtained by further purification. Preparation of oxygen, nitrogen, and argon is mainly achieved through air separation equipment. Large-scale air separation equipment is mainly used in
The separation of inert gases in the air
Wednesday, 02 May 2018
Would you like to know how to manufacture the industrial rare gas? Although the industrial gas is usually the nitrogen, but it not as rare gas. Nitrogen is air separated, rectified from the air cryogenic liquefied, then the nitrogen and oxygen can be got etc. Helium is mainly from the natural gas, because its content in the air is too little, some mineral resources of the natural gas contain much Helium. It can be air separated by liquefaction, Helium is one kind of rare resources, it is really little in the earth, it is basically non-renewable resources, the price is increasing recent years. Certainly, Helium is also got form the air separation, because Helium and neon are really difficult to